Lokhen wheel chock | Wheel chock | 6.5t | E53
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
| From 1 Pc. | 12.90 € * incl. VAT. |
| From 5 Pc. | 12.50 € * incl. VAT. |
| From 10 Pc. | 11.90 € * incl. VAT. |
- Order number: 888003
Wheel chocks are stable wedges made of metal, plastic or other suitable materials that are intended to secure parked motor vehicles including trailers against rolling away by blocking at least one wheel. Regulations for the design of wheel chocks are laid down in DIN standards 76051-1 “Wheel chocks for motor vehicles and trailers” and 76051-2 “Wheel chocks for agricultural vehicles, functional dimensions”, among others. Germany’s national road traffic regulations (StVZO) stipulate in section 41(14) (as at: 19 October 2012) that the following motor vehicles and trailers must be equipped with at least one wheel chock:
- Motor vehicles – except track vehicles – with a permissible total weight of more than 4 t
- Two-axle trailers (except semi-trailers, rigid drawbar trailers and centre-axle trailers) with a permissible gross weight of more than 750 kg
According to the same regulation, the following must be equipped with at least two wheel chocks:
- Three- and multi-axle vehicles
- Semi-trailers
- Rigid drawbar and centre-axle trailers with a permissible gross weight of more than 750 kg
When not in use, the wheel chocks belonging to the motor vehicle or trailer must be mounted in or on the vehicle in an easily accessible manner with holders so that they cannot become detached or rattle. Therefore, hooks or chains must not be used as holders for wheel chocks.
According to section 31b of Germany’s national road traffic regulations (StVZO), drivers of motor vehicles are obliged to show relevant authorities, e.g. the police, any objects they are carrying and to hand them over for inspection to ensure that they are in compliance with the regulations. This also includes wheel chocks.
Intentionally or negligently starting up a motor vehicle (possibly with trailer) in violation of the above-mentioned regulations on equipping with wheel chocks, their condition and installation constitutes a traffic offence according to StVZO, section 69a(3), No. 13.
| Colour: | Yellow |
| Width: | 198 mm |
| Height: | 225 mm |
Wheel load: up to max 6.5t
Without wheel slide protection
Made in Italy
Warnings against hand injuries
Warning: Safeguard before use!
LaSi24 GmbH
Industriestr. 15
18069 Rostock
Mecklenburg-Vorpommern
Deutschland
info@lasi24-shop.de
for Welvet, Just & Flink tool boxes
Dimensions: 0.4 + 7.6 m
Incl. individual imprint
Length: 4x 1000 mm
+ 8 end caps + 10 fittings
+ Adhesive
Dimensions: 0.5 + 3.5 m
for "Blackit" drawbar boxes
Dimensions: 550 x 250 x 295 mm
With triangle
Dimensions: 0.5 + 3.0 m
Length: 3.5 m
Länge: 6 m
Artikel-Nummer: 83005S
schwarz
Dimensions: 0.4 + 5.6 m
Dimensions: 0.4 + 7.6 m
Dimensions: 200 x 300 x 8 mm
Länge: 2400 - 2700 mm
Dimensions: 250 x 5000 x 8 mm
Dimensions: 250 x 5000 x 8 mm
290 x 100 mm
290 x 100 mm
170 x 70 mm
Length: 102 mm
Length: 2 m
Länge: 2250mm
For Origamy wheel chock
Length: 2400–2700 mm
Dimensions: 0.3 + 3.7 m
Dimensions: 0.4 + 5.6 m
Incl. individual imprint
Länge: 5 m
Dimensions: 250 x 5000 x 8 mm
Length: 4 m
290 x 100 mm
130 x 50 mm
Maße: 260x1450x880 mm
LC 1000 daN | M8 thread
for V-Class, Vito & Viano
Dimensions: 0.2 + 2.8 m
Color: gray
Length: 1500 mm
Dimensions: 150 x 600 x 3 mm
Dimensions: 0.5 + 3.5 m
Dimensions: 0.2 + 2.0 m
Dimensions: 750 x 300 x 355 mm
Set of 3 for the transporter rear & side doors
for the transporter rear or side door
Dimensions: 550 x 250 x 295 mm
80 mm
Dimensions: 150 x 150 x 3 mm
Length: 2x 1975 mm
+ 4 end caps
+ 10 fittings
Length: 6 m
Length: 2x 1975 mm
+ 4 end caps
+ 10 fittings
Dimensions: 0.4 + 7.6 m
Incl. individual imprint
Dimensions: 0.5 + 7.5 m
Length: 1975 mm
Dimensions: 0.4 + 7.6 m
Incl. individual imprint
Länge: 5 m
With end caps
Length: 1964 mm
Dimensions: 2290 x 1500 mm
Dimensions: 1250 x 730 mm